Re: [Mdk9.2] Image mauvaise a l'ecran: comment regler la frequence ?

["Franck Michel" <Franck.Michel@wanadoo.fr>]

> pourtant jai le meme ecran
> meme frequence vertical et horizontal que toi
> mais pas les modeline, mais bon ça vient pas de ça

Peut-être Mandrake est perturbé par la présence de deux moniteurs (celui du
portable et celui externe), qui plus est, l'un d'eux étant TFT et l'autre
CRT
Normalement, je peux utiliser trois modes de fonctionnement, réglables à
partir des touches de fonction du portable:
1) uniquement l'écran du portable
2) uniquement l'écran externe
3) les deux en même temps
Il y a déjà une différence avec Windows: si je quitte le système à partir de
2), lorsque je relance, je reviens sur 2) Plus généralement: si je quitte
sur i), je reviens sur i), quel que soit i)
Tandis qu'avec Mandrake, si je quitte le système sur 2), lorsque je relance,
je suis sur 3)
Mais ça n'a peut être pas de rapport avec mon problème.

> quand tu a lancé X regarde tu dois avoir un log genre
/var/log/XFree86.0.log
> cherche si tu a pas des Warnings ou autre message interessant

Oui, effectivement, il y a ce fichier. Je n'y comprends pas grand chose mais
je ne suis pas très fort pour cela; le fichier est un peu long, je copie la
fin, c'est là que les choses les plus intéressantes semblent se trouver:

(II) VESA(0): Total Memory: 1024 64KB banks (65536kB)
(II) VESA(0): monitor1: Using hsync range of 30.00-70.00 kHz
(II) VESA(0): monitor1: Using vrefresh range of 48.00-120.00 Hz
(**) VESA(0): Virtual size is 1024x768 (pitch 1024)
(**) VESA(0): *Built-in mode "1024x768"
(**) VESA(0): *Built-in mode "800x600"
(**) VESA(0): *Built-in mode "640x480"
(**) VESA(0): *Built-in mode "640x400"
(**) VESA(0): *Built-in mode "640x350"
(--) VESA(0): Display dimensions: (330, 240) mm
(--) VESA(0): DPI set to (78, 81)
(II) VESA(0): Attempting to use 85Hz refresh for mode "1024x768" (118)
(II) VESA(0): Attempting to use 85Hz refresh for mode "800x600" (115)
(II) VESA(0): Attempting to use 85Hz refresh for mode "640x480" (112)
(II) VESA(0): Attempting to use 85Hz refresh for mode "640x400" (185)
(II) VESA(0): Attempting to use 85Hz refresh for mode "640x350" (1c5)
(**) VESA(0): Using "Shadow Framebuffer"
(II) Loading sub module "shadow"
(II) LoadModule: "shadow"
(II) Loading /usr/X11R6/lib/modules/libshadow.a
(II) Module shadow: vendor="The XFree86 Project"
 compiled for 4.3.0, module version = 1.0.0
 ABI class: XFree86 ANSI C Emulation, version 0.2
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
 compiled for 4.3.0, module version = 1.0.0
 ABI class: XFree86 ANSI C Emulation, version 0.2
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
 [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
 [1] -1 0 0x00100000 - 0x1fffffff (0x1ff00000) MX[B]E(B)
 [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
 [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
 [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
 [5] -1 0 0xd0000000 - 0xd0000fff (0x1000) MX[B]
 [6] -1 0 0xd0001000 - 0xd00010ff (0x100) MX[B]
 [7] -1 0 0xd0004000 - 0xd0007fff (0x4000) MX[B]
 [8] -1 0 0xd0001800 - 0xd0001fff (0x800) MX[B]
 [9] -1 0 0xf0000600 - 0xf00006ff (0x100) MX[B]
 [10] -1 0 0xf0000400 - 0xf00005ff (0x200) MX[B]
 [11] -1 0 0x20000000 - 0x200003ff (0x400) MX[B]
 [12] -1 0 0xf0000000 - 0xf00003ff (0x400) MX[B]
 [13] -1 0 0xb0000000 - 0xafffffff (0x0) MX[B]O
 [14] -1 0 0xe0010000 - 0xe001ffff (0x10000) MX[B](B)
 [15] -1 0 0xa8000000 - 0xafffffff (0x8000000) MX[B](B)
 [16] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
 [17] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
 [18] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
 [19] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
 [20] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
 [21] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[B]
 [22] -1 0 0x0000e300 - 0x0000e37f (0x80) IX[B]
 [23] -1 0 0x0000e200 - 0x0000e2ff (0x100) IX[B]
 [24] -1 0 0x0000e100 - 0x0000e13f (0x40) IX[B]
 [25] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B]
 [26] -1 0 0x00001400 - 0x0000141f (0x20) IX[B]
 [27] -1 0 0x00001100 - 0x0000110f (0x10) IX[B]
 [28] -1 0 0x00001700 - 0x0000171f (0x20) IX[B]
 [29] -1 0 0x00001600 - 0x0000161f (0x20) IX[B]
 [30] -1 0 0x00001200 - 0x0000121f (0x20) IX[B]
 [31] -1 0 0x0000c100 - 0x0000c1ff (0x100) IX[B](B)
 [32] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
 [33] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/X11R6/lib/modules/linux/libint10.a
(II) VESA(0): initializing int10
(II) VESA(0): Primary V_BIOS segment is: 0xc000
(II) VESA(0): VESA BIOS detected
(II) VESA(0): VESA VBE Version 2.0
(II) VESA(0): VESA VBE Total Mem: 65536 kB
(II) VESA(0): VESA VBE OEM: ATI MOBILITY RADEON 9200
(II) VESA(0): VESA VBE OEM Software Rev: 1.0
(II) VESA(0): VESA VBE OEM Vendor: ATI Technologies Inc.
(II) VESA(0): VESA VBE OEM Product: M9+
(II) VESA(0): VESA VBE OEM Product Rev: 01.00
(==) VESA(0): Write-combining range (0xa8000000,0x4000000)
(II) VESA(0): virtual address = 0x40285000,
 physical address = 0xa8000000, size = 67108864
(II) VESA(0): VBESetVBEMode failed...Tried again without customized values.
(==) VESA(0): Default visual is TrueColor
(==) VESA(0): Backing store disabled
(**) Option "dpms"
(**) VESA(0): DPMS enabled
(==) RandR enabled
(II) Setting vga for screen 0.
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Keyboard "Keyboard1" handled by legacy driver
(**) Option "Protocol" "IMPS/2"
(**) Mouse1: Protocol: "IMPS/2"
(**) Option "CorePointer"
(**) Mouse1: Core Pointer
(**) Option "Device" "/dev/usbmouse"
(**) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Mouse1: ZAxisMapping: buttons 4 and 5
(**) Mouse1: Buttons: 5
(**) Option "Protocol" "PS/2"
(**) Mouse2: Protocol: "PS/2"
(**) Option "SendCoreEvents"
(**) Mouse2: always reports core events
(**) Option "Device" "/dev/psaux"
(**) Option "Emulate3Buttons"
(**) Option "Emulate3Timeout" "50"
(**) Mouse2: Emulate3Buttons, Emulate3Timeout: 50
(==) Mouse2: Buttons: 3
(II) XINPUT: Adding extended input device "Mouse2" (type: MOUSE)
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
(II) Mouse1: ps2EnableDataReporting: succeeded
(II) Mouse2: ps2EnableDataReporting: succeeded
(II) Open APM successful
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/X11R6/lib/modules/linux/libint10.a
(II) VESA(0): initializing int10
(II) VESA(0): Primary V_BIOS segment is: 0xc000
(II) VESA(0): VESA BIOS detected
(II) VESA(0): VESA VBE Version 2.0
(II) VESA(0): VESA VBE Total Mem: 65536 kB
(II) VESA(0): VESA VBE OEM: ATI MOBILITY RADEON 9200
(II) VESA(0): VESA VBE OEM Software Rev: 1.0
(II) VESA(0): VESA VBE OEM Vendor: ATI Technologies Inc.
(II) VESA(0): VESA VBE OEM Product: M9+
(II) VESA(0): VESA VBE OEM Product Rev: 01.00
(==) VESA(0): Write-combining range (0xa8000000,0x4000000)
(II) VESA(0): virtual address = 0x40325000,
 physical address = 0xa8000000, size = 67108864
(==) VESA(0): Default visual is TrueColor
(**) VESA(0): DPMS enabled
(==) RandR enabled
(II) Mouse1: ps2EnableDataReporting: succeeded
(II) Mouse2: ps2EnableDataReporting: succeeded

----------------------------------
Informations, désabonnement, règles, obligations sur la liste Aide-Linux :
http://lists.ze-linux.org/howto_ml.html